[TrunkCom] Control Frequency Only Mode

[Jeff Kenyon]

Hi Jerry, with the 9600 BAUD P-25 systems, the control channels don't
typically change all the time, but with the older 3600 BAUD systems they
do change, typically once a dcay at midnight or thereabouts, but the
system controler can set up the trunked system to change control channels
at other times of the day.  I don't know why this is with the type II
systems, but there was a type I system in my area that hardly ever changed
the control channel.  As for EDACS systems, they don't typically change
channels consistently either.  Another question to ponder is when does it
become necessary for VHF/UHF Motorola systems to have multiple base and
table ranges?




On Wed, 26 Oct 2005, JERRY NONE wrote:

> That brngs to mind a question.  Is it good for a
> Controller to always stay on the same frequency unless
> it is VOC or SCAT, well I guess LTR does NOT come into
> play so I won't mention it.
>
> ========================================================================
> Southwestern Cuyahoga County Ohio, Parma Ohio & Strongsville Ohio Radio Scanner Group:
> http://groups.yahoo.com/group/Southwest_Parma_Strongsville/
> ------------------------------------------------------------------------
> County Of Medina Ohio County Scanner Group:
> http://groups.yahoo.com/group/medinascanner/
> ========================================================================
>
>
>
>
> __________________________________
> Yahoo! Mail - PC Magazine Editors' Choice 2005
> http://mail.yahoo.com
> _______________________________________________
> TrunkCom mailing list
> mailto:TrunkCom at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/trunkcom
>
> Mailman: User Guide for List Subscribers
> http://mailman.qth.net/subscribers.htm
>