[TrunkCom] correction

[Todd Hartzel]

Greetings all,
      In my last post:

> When no active talkgroups are present, it will render on the
> display the Control Channel's current LCN number.  I believe
> even if you have it on the wrong LCN slot.  These displayed
> numbers look like Uniden's AFS, but are not.  And have 
> absolutely nothing to do with it.

I stated 'even if you have it on the wrong LCN', refers to the
Control Channel being programmed into the wrong LCN
slot.  Sorry abt the vague previous message.  The PRO-92
will display the current LCN of the Data Channel, so long as
you designated it 'EDACS' and are resting on it, by hitting,
'MANUAL'.  And so long as there are no active talkgroups.

This fact allows a person with a PRO-92 to quickly figure out
the LCN numbers that the Control Channel uses.  Without
having to rely on the ETRUNKER program.  For some people, 
ETRUNKER may not be an option.  Some don't wanna tap
the discriminator.  

It also means one less LCN to figure out using the talkgroup
and an old reliable Second Scanner method.  

73 from todd hartzel / n0vkg
http://www.icon-stl.net/~toddh