[TrunkCom] Scratch Fixer

Wed, 9 Jan 2002 22:09:35 -0500

ok, last question and i am done with this one :-)
For all of the suggestions, like the polish and the toothpaste, do you just
make it into a paste and rub the surface and then wipe it off and you are
good to go?
Chris

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Chris Pohlad-Thomas
Sent: Wednesday, January 09, 2002 10:03 PM
To: [email protected]
Subject: RE: [TrunkCom] Scratch Fixer

so you just rub it on and all is good?

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of David Carmean
Sent: Wednesday, January 09, 2002 9:59 PM
To: [email protected]
Subject: Re: [TrunkCom] Scratch Fixer

On Wed, Jan 09, 2002 at 08:27:10PM -0500, Chris Pohlad-Thomas wrote:

> ok, well doing a search with google for plastic scratch remover came up
with
> this stuff called Novus.  They use it on hottubs, but say it can be used
on
> all plastic and acrylic surfaces.  I guess it could be used on scanners...
> Any thoughts?
> Chris

Novus comes in three grades/strengths, and is good stuff.  It's what
we used on the instrument panels of commercial airliners when I was
in that field.

_______________________________________________
TrunkCom mailing list
mailto:[email protected]
http://mailman.qth.net/mailman/listinfo/trunkcom

_______________________________________________
TrunkCom mailing list
mailto:[email protected]
http://mailman.qth.net/mailman/listinfo/trunkcom