[TrunkCom] Scratch Fixer

Wed, 9 Jan 2002 22:02:01 -0500

Evening:
If the scratch is not deep, try rubbing "BRASSO" into
the viewing area. I would use a piece of towel (rag), to rub it in. You will
see it gradually go away. Afterwards, I would try to clean the area with
common rubbing isopropyl alcohol on a different rag. This method has worked
for me on several radios. It works best when the scratch is not very deep.
DO NOT use any other liquid cleaner other than Brasso and isopropyl alchol.
USE AT YOUR OWN RISK, I WILL NOT BE RESPONSIBLE FOR ANY PROBLEMS THAT EXIST
AS A RESULT OF USING THIS METHOD. It has worked for me on 3 radios.
Paul Cobb   KD4CDE

----- Original Message -----
From: "Chris Pohlad-Thomas" <[email protected]>
To: <[email protected]>
Sent: Wednesday, January 09, 2002 6:52 PM
Subject: [TrunkCom] Scratch Fixer

> I was wondering what are some techniques you all use when the plastic view
> area of your scanner gets scratched.  I thought i heard you could get
> sandpaper or something for that.  What are some techniques that you all
use?
> I know this is kind of a silly question, but it might be one that proves
to
> be very useful.
> Chris
>
> _______________________________________________
> TrunkCom mailing list
> mailto:[email protected]
> http://mailman.qth.net/mailman/listinfo/trunkcom