[TMRA] Fwd: PSK31 test partner

[Joe Thielen]

---------- Forwarded message ----------
From: Joe Thielen <joe at joethielen.com>
Date: Wed, May 5, 2010 at 12:59 PM
Subject: Re: [TMRA] PSK31 test partner
To: briank at glmotorsports.net


The IC7000 also has the data socket.

1 is sound in
2 is GND
3 is PTT (ground it)



On Wed, May 5, 2010 at 12:58 PM, Joe Thielen <joe at joethielen.com> wrote:

> I've got an IC-7000.  Got the manual right here :)
>
> Pin 4 is the PTT
> Pin 5 is GND
> Pin 6 is Microphone Input
>
> I think PTT just gets shorted to ground, but I could be mistaken.  Pin 1 is
> +8VDC in case you need to short it to that.
>
>
> On Wed, May 5, 2010 at 12:56 PM, <briank at glmotorsports.net> wrote:
>
>>      Does anyone have a good pinout description for ICom?  I've tried with
>> an IC-7000 and an IC-910H with no success.  It appears that
>> there's different pins to use depending on band, etc (I forget exactly was
>> last year's project, just now getting back to it).  Never found the right
>> combination of pins and modes yet...  :-/
>>
>> --Brian KD8COO
>>
>>
>> -------- Original Message --------
>> #3: If both of those are OK, then the next issue is if the sound is
>> actually making it into the radio to be transmitted... i.e., is the
>> pin-out
>> of the cable you're using right and solid.
>>
>>
>