[TMRA] Fwd: PSK31 test partner

[Joe Thielen]

---------- Forwarded message ----------
From: Joe Thielen <joe at joethielen.com>
Date: Wed, May 5, 2010 at 12:58 PM
Subject: Re: [TMRA] PSK31 test partner
To: briank at glmotorsports.net


I've got an IC-7000.  Got the manual right here :)

Pin 4 is the PTT
Pin 5 is GND
Pin 6 is Microphone Input

I think PTT just gets shorted to ground, but I could be mistaken.  Pin 1 is
+8VDC in case you need to short it to that.


On Wed, May 5, 2010 at 12:56 PM, <briank at glmotorsports.net> wrote:

>      Does anyone have a good pinout description for ICom?  I've tried with
> an IC-7000 and an IC-910H with no success.  It appears that
> there's different pins to use depending on band, etc (I forget exactly was
> last year's project, just now getting back to it).  Never found the right
> combination of pins and modes yet...  :-/
>
> --Brian KD8COO
>
>
> -------- Original Message --------
> #3: If both of those are OK, then the next issue is if the sound is
> actually making it into the radio to be transmitted... i.e., is the pin-out
> of the cable you're using right and solid.
>
>