[TMC] Part Needed for My TMC GPR-90 Receiver

[Mahlon Haunschild]

Come to think of it,  I could use one of those myself.

So, if anyone has a stash of 'em, let us know.

regards,

Mahlon - K4OQ

tmc-request at mailman.qth.net wrote:
> Send TMC mailing list submissions to
> 	tmc at mailman.qth.net
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://mailman.qth.net/mailman/listinfo/tmc
> or, via email, send a message with subject or body 'help' to
> 	tmc-request at mailman.qth.net
> 
> You can reach the person managing the list at
> 	tmc-owner at mailman.qth.net
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TMC digest..."
> 
> 
> Today's Topics:
> 
>    1. Part Needed for My TMC GPR-90 Receiver (triodes at optonline.net)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Mon, 04 May 2009 02:26:12 +0000 (GMT)
> From: triodes at optonline.net
> Subject: [TMC] Part Needed for My TMC GPR-90 Receiver
> To: TMC at mailman.qth.net
> Message-ID: <e48682581645b.49fe5244 at optonline.net>
> Content-Type: text/plain; charset=us-ascii
> 
> I recently acquired a nice TMC GPR-90 with the GSB-1 SSB converter.
>  
> On the GPR-90, the hole plug with the TMC logo that is used to close off the S-meter zero adjust screw access hole is missing the TMC logo. This is an adhesive-backed applique, that is no doubt not available anywhere, and probably hasn't been since the early 60's! Sometime during the life of this receiver, the logo was peeled off, etc.
>  
> Does anyone have this hole plug with a clean, damage-free logo on it from a junker GPR-90, etc? I really need this to complete the restoration of this beautiful old receiver.
>  
> Any help would be really appreciated!
>  
> Thanks & 73,
>  
> Bruce, W2XR
> 
> 
> ------------------------------
> 
> ______________________________________________________________
> TMC mailing list
> Home: http://mailman.qth.net/mailman/listinfo/tmc
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:TMC at mailman.qth.net
> 
> 
> End of TMC Digest, Vol 52, Issue 1
> **********************************
>