[TheForge] Conveyor belts

[lp.brown at verizon.net]

 Thanks
    On Saturday, November 25, 2023 at 11:41:55 AM EST, JERRY FROST <akfrosty at mtaonline.net> wrote:  
 
 I've had decent luck at the local rubber supply, Alaska Rubber, they handle most everything made of or with rubber and they do installations so they sometimes have rems.

When I set up my 50lb. LG none was available so I bolted it to 6" x 12" timbers and it rides nicely steady without being bolted down. It's pinned in position but not solidly. I made a 2" x 6" sq tubing pin welded to 2x2 angle iron. It screws to the wood base and fits into a gozinta in the floor. It keeps the hammer where it's supposed to be and it only vibrates on the floor. 

It also raises my hammer to a more comfortable working height making keeping the work parallel with the die faces WAY easier than having them mid thigh high.

Of course that's just me.

Frosty.

----- Original Message -----
From: "Stephen Bloom" <sabloom at ironflower.com>
To: "lp brown" <lp.brown at verizon.net>, "Blacksmithing List Sponsored by ABANA" <theforge at mailman.qth.net>
Sent: Saturday, November 25, 2023 6:44:35 AM
Subject: Re: [TheForge] Conveyor belts

Horse mats?  I lucked out years ago and got a large conveyor belt -- ~2 ft wide x 1/2" thick -- used under my 50 and still working after 30+ years as well as fatigue maps in the metal & wood shop as well as platen covers for the 2x72 grinder face (with graphite cover glued on).  Steve
________________________________
From: theforge-bounces at mailman.qth.net <theforge-bounces at mailman.qth.net> on behalf of lp.brown--- via TheForge <theforge at mailman.qth.net>
Sent: Saturday, November 25, 2023 10:32 AM
To: Blacksmithing List Sponsored by ABANA <theforge at mailman.qth.net>
Subject: [TheForge] Conveyor belts

Hi all,Does anyone have any conveyor belting to put under a #50 little giant? Or a source for a small piece? I’m trying not to buy a lot more than I needThanksLarry Brown
______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.shutterfly.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to sabloom at ironflower.com
______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.shutterfly.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to akfrosty at mtaonline.net
______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.shutterfly.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to lp.brown at verizon.net