[TheForge] NON blacksmithing question.

[Mark & Sylvia Mondloch]

Hi Mike , I think there is a foot valve in the bottom of the well on top of the pump to keep the water from going back down into the well when the pump shuts off ..
I regards to your second post . It might work but he will have to fix it someday. I am sure that it is where it is for a reason .
-----Original Message-----
From: theforge-bounces at mailman.qth.net [mailto:theforge-bounces at mailman.qth.net] On Behalf Of CGRAF
Sent: Saturday, January 9, 2021 1:03 PM
To: TheForge at mailman.qth.net
Subject: [TheForge] NON blacksmithing question.


I have a City Boy question that was posted to me by another city boy who recently moved to rural Kentucky from Milwaukee.

His problem is this:

His well pump brings his tank up to pressure in about 5 minutes starting a 0 psi.

Pump shuts off as it should at 58 psi.

Two minutes later pressure has dropped to 30 pis and pump comes back on.

Two minutes later it is back to pressure.

IF he turns off power to the pump pressure falls to 0 psi  within 5 minutes.

When the water line going to the pump is turned off pressure remains up.

This is entirely outside my and his realm of experience. It is too far for me to lay hands on it from Milwaukee.

 From piping layouts that I have come up with on line I am thinking perhaps a back flow valve is not working??


Mike Graf


-- 
This email has been checked for viruses by AVG.
https://www.avg.com

______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.shutterfly.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to mondloch at silvercreekpottery.com