[TheForge] Question about metallic heat shield for wood stoves

[Andrew Vida]

OK, let me get out there ASAP and take some photos.  I will get back to 
you.  I'd like this to be done as closely to correct as possible.



On 10/25/14, 8:36 AM, CGRAF wrote:
> Andy as to the flashing.
> Send me a picture and then we could talk.
> The "tons o' tar" approach makes my skin crawl.
> When I get called to fix one of those it easily raises the cost of 
> doing it correctly 3X.
>
>
> If there is any kind of pitch at all tin shingles properly installed 
> with a cap flashing should do the trick.
>
>
> Tin shingle 4X4 X (whatever the exposure is on the shingle  +2")
>
> Tin shingles 3-4 out onto the roof deck interlaced with the 
> shingles(think fish scales.) 3-4 inches up the wall (bend so that they 
> are spring fit to the wall.
> Secure tin shingles using minimalist thought process. If you start at 
> the bottom one nail in the top edge into the roof deck and sliding the 
> wall section beneath the siding you are good to go.
> The next tin shingle (with the asphalt shingle between) overlaps the 
> first one and covers the nailed space.
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
>
> TheForge mail list group photo site is
> http://www.shutterfly.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>