[TheForge] Temper colors

[Peter Fels & Phoebe Palmer]

Martin, unless it's bone dry where you are,
polished steel should not be left bare.
Even fingerprints will etch it when  bare.

On Jan 9, 2014, at 5:15 AM, martin marks wrote:

I do not finish the blades with anything other than windex atm. I let the people i give these to know that they should treat them with food grade oil after they are clean/dry. 
--------------------------------------------
On Wed, 1/8/14, Jerry Frost <akfrosty at mtaonline.net> wrote:

Subject: Re: [TheForge] Temper colors
To: "'Blacksmithing List Sponsored by ABANA'" <theforge at mailman.qth.net>
Date: Wednesday, January 8, 2014, 6:46 PM

A last question for you  Martin.
What are you finishing the blades with? If
oils, many change colors with a little time and in seconds
if heated. Some
waxes do the same but more slowly. These too are patinas and
can be
controlled to a degree in the shop but not in the customer's
hands. Care
needs to be taken with the final finish/sealant/rust
preventative. For food
I like bacon grease, culture permitting of course. Animal
grease is a low
toxicity, polymerization and color change finish.

Frosty
-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net]
On Behalf Of martin marks
Sent: Wednesday, January 8, 2014 4:32 AM
To: Blacksmithing List Sponsored by ABANA
Subject: Re: [TheForge] Temper colors

This is it. It is going through the Patina process. The heat
speeds up the
reaction tremendously. Glad to get to the bottom of this.
Thanks guys. 
--------------------------------------------
On Tue, 1/7/14, Ron Childers <ron at munlaw.net>
wrote:

 Subject: Re: [TheForge] Temper colors
 To: "Charles" <xlch58 at swbell.net>,
"Blacksmithing List Sponsored by ABANA"
<theforge at mailman.qth.net>
 Date: Tuesday, January 7, 2014, 12:25 PM

 Salt, sauce, etc. will tarnish a
 polished blade. We call it "antiquing" when we want a 
patina. It will
actually protect the blade. Dab some mustard  on it,
let sit an hour or so
and wash off; repeat until you  get the desired effect.
"Mustardizing".   

 -----Original Message-----
 From: theforge-bounces at mailman.qth.net
 [mailto:theforge-bounces at mailman.qth.net]
 On Behalf Of Charles
 Sent: Tuesday, January 07, 2014 12:03 PM
 To: Blacksmithing List Sponsored by ABANA
 Subject: Re: [TheForge] Temper colors

 Heat will speed up most chemical reactions

 Charles



______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.shutterfly.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.shutterfly.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html