[TheForge] Half round stock

[Peter Fels & Phoebe Palmer]

How did he do it Bob?

On Feb 26, 2014, at 4:31 PM, Bob Ehrenberger wrote:

When I've needed 1' or 2' of half round, I've done it by hand at the swage 
block.  Depending on how hard it is to make tooling for your power hammer, 
it wouldn't take that long to make a bottom swage to mount on the bottom 
die.  But like you said even by hand it wouldn't be that hard to make 
several feet, maybe sucker a helper into striking for you.

At our November meeting Don Birdsall demonstrated how to convert steel pipe 
into a railing cap rail under the power hammer.

Robert Ehrenberger
Shelbyville, Mo.
eforge at centurytel.net

----- Original Message ----- 
From: "Peter Fels & Phoebe Palmer" <artgawk at thegrid.net>
To: "Bob Ehrenberger" <eforge at centurytel.net>; "Blacksmithing List Sponsored 
by ABANA" <theforge at mailman.qth.net>
Sent: Wednesday, February 26, 2014 6:03 PM
Subject: Re: [TheForge] Half round stock


With an old time 1/2" swage, or home made equivalent,
it wouldn't be all that much work to just forge it out by hand.

On Feb 26, 2014, at 10:51 AM, Bob Ehrenberger wrote:

On Wed, 26 Feb 2014, CGRAF wrote:

> 
> Todd 1/2 full round is not the problem. I need 1/2 half round.
> The closest that I have gotten thus far is 9/16ths banding stock.
> 
> I need this to make some dies for my leaf break to match some existing
> work
> on a conservatory that is being rebuilt
> 
> Thanks for your effort.
> 
> A friend on another list informs me that 3/4 has been the small end
> manufactured for several years.
> 
> Mike Graf

If you have a power hammer or a friend with one, it would be easy enough to
make yourself. Probably take less time than trying to find a factory source,
when you only need 8'-12'.

Robert Ehrenberger
Shelbyville, Mo.
eforge at centurytel.net


______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.shutterfly.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html