[TheForge] Half round stock

[Peter Fels & Phoebe Palmer]

With an old time 1/2" swage, or home made equivalent,
it wouldn't be all that much work to just forge it out by hand.

On Feb 26, 2014, at 10:51 AM, Bob Ehrenberger wrote:

On Wed, 26 Feb 2014, CGRAF wrote:

> 
> Todd 1/2 full round is not the problem. I need 1/2 half round.
> The closest that I have gotten thus far is 9/16ths banding stock.
> 
> I need this to make some dies for my leaf break to match some existing 
> work
> on a conservatory that is being rebuilt
> 
> Thanks for your effort.
> 
> A friend on another list informs me that 3/4 has been the small end
> manufactured for several years.
> 
> Mike Graf

If you have a power hammer or a friend with one, it would be easy enough to 
make yourself. Probably take less time than trying to find a factory source, 
when you only need 8'-12'.

Robert Ehrenberger
Shelbyville, Mo.
eforge at centurytel.net
573-633-2010

______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.shutterfly.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html