[TheForge] Tiger blower?

[Rob Fertner]

The tiger is the same design as the Cannedy-Otto blower. If the gears are
good then it'll be a good blower.
Disassemble completely (I use PBlaster from the auto parts store to loosen
everything up) and clean real good.
Reassemble and use new oil. Hopefully, it'll crank and blow good.

Rob

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Ron Childers
Sent: Monday, May 06, 2013 10:43 AM
To: Blacksmithing List Sponsored by ABANA
Subject: Re: [TheForge] Tiger blower?


Does anyone have any information on an old hand crank blower that has no
markings except "TIGER" on the mounting bracket? It was "froze up" and the
atf and acetone, etc mix loosened it a bit but although the fan will turn
the crank shaft doesn't...It was rescued from a junk pile in Texas by a
friend, but is it worth wasting time messing with it? Thanx. Ron C

______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.shutterfly.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html