[TheForge] gloves

mlforge at cebridge.net mlforge at cebridge.net
Thu Mar 31 17:22:46 EDT 2011


have some kevlar gloves good for 875 degrees, fits either hand long cuff, $14 a pair or 2 pair for $25 plus shipping. A little more bulky than the standard hot mill kevlar found at blacksmith supply sites
--
Maple Leaf Forge
Ralph Neumeister
17231 Messenger Rd
Auburn Twp., Oh 44023

---- Mike Spencer <mspencer at tallships.ca> wrote: 

I wear an unlined, gauntleted all-leather glove on my left -- holding
-- hand nearly all the time at the forge.  Y'all know all the reasons,
whether you agree with them or not.  But here's another little glove
bit:

Doing hot detailing, such as a gargoyle face on the end of a 2" round,
I have a couple of dozen punches, chisels, fullers etc.  Some of them
are kinda short.  Held, palm up, between thumb and forefinger with the
struck end over the palm of the hand, your knuckles don't get in the
way of seeing what you're doing.  But it puts the knuckle and proximal
phalanx of the forefinger so close to the workpiece that I've raised a
blister right through a heavy leather glove, just from the radiant
heat.

So I cut out some strips of 1/2"-thick ceramic batt, the stuff you
line gas forges with, put them over the affected part of an old
leather glove, and contact-cemented a cover of garment leather over
the bits of batt.  Makes a glove stiff, clunky and useless for
anything else but now I can hold those little hot-chasing (is that an
approved term?  :-) tools right up there close to a gargoyle's
red-hot nose.  The leather may char a bit but no more blisters on my
forefinger.

I know there are gloves -- someone just mentioned them -- that allow
you to directly hold very hot stuff and they'd probably be better but
I haven't seen them (except at an ABANA con umpty years ago, where
they were very dear.)  My little glove hack works well enough for it's
single purpose.

- Mike

-- 
Michael Spencer                  Nova Scotia, Canada       .~. 
                                                           /V\ 
mspencer at tallships.ca                                     /( )\
http://home.tallships.ca/mspencer/                        ^^-^^

______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.photoworks.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



More information about the TheForge mailing list