[TheForge] OT switch

[Larry Brown]

They're a little different size wise. if I can't get the right one thats 
probably what I'll go with.
Thanks
L Brown


At 06:41 PM 3/3/2011 -0800, you wrote:
>grainger?
>Dan Scheid
>
>On Thu, 2011-03-03 at 21:36 -0500, Larry Brown wrote:
> > Hi
> > I know we have a varied group here so I will ask for help on this.
> > I had to replace the zone valve in my heating system, cost $80.
> > The problem with the valve is the "end" switch which turns things on after
> > the valve opens. This is a small micro switch which should let the system
> > know the valve is open and the heat can start.
> >
> > Number on the  switch is:
> > V5C010SB3X147
> > It is Rated  11A 1/3 HP125/250 VAC
> > and is about 1 1/8 long x 5/8 high x 3/8 thick having mounting holes 15/16
> > apart diagonally on it
> >
> > Anyone know of a source?
> >
> > Larry Brown
> >
> > ______________________________________________________________
> > TheForge mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/theforge
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:TheForge at mailman.qth.net
> >
> > TheForge mail list group photo site is
> > http://www.photoworks.com
> > Login: blacksmithblacksmith at hotmail.com
> > Password: anvil
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
>
>
>______________________________________________________________
>TheForge mailing list
>Home: http://mailman.qth.net/mailman/listinfo/theforge
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:TheForge at mailman.qth.net
>
>TheForge mail list group photo site is
>http://www.photoworks.com
>Login: blacksmithblacksmith at hotmail.com
>Password: anvil
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html