[TheForge] OT switch

[Bob Willman]

	Try www.mcmelectronics.com 

 


Bob Willman
The Eagle's Anvil
WB8NQW
Bowling Green, Ohio

The democracy will cease to exist when you take away from those who are
willing to work and give to those who would not.

Thomas Jefferson
-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Larry Brown
Sent: Thursday, March 03, 2011 9:36 PM
To: theforge at mailman.qth.net
Subject: [TheForge] OT switch

Hi
I know we have a varied group here so I will ask for help on this.
I had to replace the zone valve in my heating system, cost $80.
The problem with the valve is the "end" switch which turns things on after
the valve opens. This is a small micro switch which should let the system
know the valve is open and the heat can start.

Number on the  switch is:
V5C010SB3X147
It is Rated  11A 1/3 HP125/250 VAC
and is about 1 1/8 long x 5/8 high x 3/8 thick having mounting holes 15/16
apart diagonally on it

Anyone know of a source?

Larry Brown

______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.photoworks.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html