[TheForge] burners

[Bob]

     I too am considering a natural gas forge but I have 12-15 lbs 
pressure available so I hope to go naturally aspirated. Still debating 
whether to build or buy the burner(s).

Bob Willman
The Eagle's Anvil
Bowling Green, Ohio
WB8NQW

The natural progress of things is for liberty to yield and government to gain ground.

Thomas Jefferson
in a letter to E. Carrington,
May 27,1788


On 12/30/2011 2:24 PM, Cindy and James wrote:
> I'm looking to make a natural gas forge, most likely "blown" (as in with
> a blower, not up... :-)).
> I presume the same design for a regular propane burner would work except
> the orifice would have to be significantly larger.
> Just how MUCH larger?  I suppose trial and error could discover that but
> 1 or more of you probably already know the answer.
>
> I say "blown" as I only have standard residential pressure, and I have
> heard you can "blow" a forge and achieve desired temps w/ low pressure
> service in this manner.
>
> my supply lines to the yet to be constructed forge (from the street) are
> 1".  I'll probably use one of the large flex supply lines that is for a
> tankless hot water heater, I think they are a full 3/4 or 7/8 inside.
>
> What type blower would be best?  I have a blower I used on the first
> coal forge I had that could be used.  it is electric and works well in
> that application but changed it simply because I came across a vintage
> blower from a buddy and it "looks better" attached to my coal forge.
>
> Where would I introduce the forced air?  Mixed with the gas thru the
> ventura ? or just into the burner chamber?
>
> If anyone asks "why" I'm doing this, the short answer is to be "legal".
> My shop is completely enclosed and I have no location for a propane tank
> outside.  The fire marshal advised it was illegal to have cylinder
> inside.  Of course, acetylene is ok, but not propane.
>
> James,
> NE Texas
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
>
> TheForge mail list group photo site is
> http://www.photoworks.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>