[TheForge] Benches

[Mark A. Pesetsky]

Any pics Mark? 

-----Original Message-----
From: theforge-bounces at mailman.qth.net [mailto:theforge-bounces at mailman.qth.net] On Behalf Of williamsiron at comcast.net
Sent: Wednesday, July 28, 2010 12:26 PM
To: Blacksmithing List Sponsored by ABANA
Subject: Re: [TheForge] Benches



I mounted some post vises on metal supports. The smaller one used 3/8" plate and an H beam for the upright. The larger used 1/2" plate butt welded to cover a 2 x 3 ft (or so) area. We punched holes in the corners for stakes to anchor the stand. Basically, you have a large plate on the floor or ground. The H beam is welded vertically to the plate and a smaller plate is welded to the top at the proper vertical distance for your vise. Your vise mounts on the smaller plate. You can weld studs onto the smaller plate and then bolt down the vise. I would not advise welding the vise directly to the stand, however. I used a short piece of pipe welded to the lower plate to hold the end of the post or leg. The larger stand weighs about 200 + lbs. 



They work real well. 



Mark Williams 

Snow Hill, Maryland 


----- Original Message -----
From: "Graham Whaley" <graham.whaley at gmail.com>
To: "Blacksmithing List Sponsored by ABANA" <theforge at mailman.qth.net>
Sent: Wednesday, July 28, 2010 3:56:26 AM
Subject: [TheForge] Benches 

I need to build a bench to mount the leg vices on, and probably an engineers vice as well. Question is, do I make it out of wood or metal? What do you folks prefer? 
Making a bench out of wood for beating hot metal near doesn't immediately seem like the best idea :-) 

  Graham
______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net 

TheForge mail list group photo site is
http://www.photoaccess.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil 

This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.photoaccess.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html