[TheForge] Kick Press

[Bob Ehrenberger]

It's kind of like an arbor press, except instead of an arm you pull down, it 
has an arm/lever that extends under the table that you push with your foot. 
There is a heavy weight that can be moved up or down the lever to increase 
or decrease the force of the stroke.

Robert Ehrenberger
Shelbyville, Mo.
eforge at centurytel.net


----- Original Message ----- 
From: "Peter Fels & Phoebe Palmer" <artgawk at thegrid.net>
To: "Bob Ehrenberger" <eforge at centurytel.net>; "Blacksmithing List Sponsored 
by ABANA" <theforge at mailman.qth.net>
Sent: Monday, July 12, 2010 1:07 PM
Subject: Re: [TheForge] Kick Press


What's the mechanism on the kick press?
Is it cam actuated?

PS
Permalac says it can be applied over urethane.

Bob Ehrenberger wrote:
> Jay,
>
> I have a follow up question.  How tall is the base that comes with the
> press?  Do you want it so the kick arm just miss the floor? or does it 
> have
> quite a bit of clearance so the work table is at a standard height? Do you
> usually sit down to use it, or can you work it standing up?
>
> The kick arm on mine is about 26" from the bottom of the press.
>
> Robert Ehrenberger
> Shelbyville, Mo.
> eforge at centurytel.net
>
>
> ----- Original Message ----- 
> From: "Jay Hayes" <xmas4lites at earthlink.net>
> To: "Bob Ehrenberger" <eforge at centurytel.net>; "Blacksmithing List 
> Sponsored
> by ABANA" <theforge at mailman.qth.net>
> Sent: Monday, July 12, 2010 12:09 AM
> Subject: Re: [TheForge] Kick Press
>
>
> Bob, I have two kick presses. Both have their own cast iron base. They
> are indeed very useful for lots of things. In some ways I prefer them to
> a fly press because you have booth hands free to hold the work and or
> tooling.
>
> .
>
> Jay
>
>
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
>
> TheForge mail list group photo site is
> http://www.photoaccess.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>