[TheForge] Ironworkers

[Dave Mudge]

We have a 30 ton Parana in the machine shop where I work.
We definitely use the punch the most and the notcher next.
It will shear 3/8 x 10 but we never put anything that heavy in the shear.
I have used the angle iron cutter a few times but I don't like the
cut that it makes. The notcher and the punch are good for
3/8" plate all the way down to 18 gauge sheet metal.
dave

On Thu, Jul 8, 2010 at 7:57 AM, Cindy and James <jallcorn at suddenlink.net> wrote:
>
> Do any of you guys use an ironworker in your shops?
> If so, what size machine and what brand?
> What is the most common use you have for it?
>
> James
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
>
> TheForge mail list group photo site is
> http://www.photoaccess.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html