[TheForge] bellows

[Bruce Freeman]

Paul,

This, for instance:
http://tinyurl.com/2d7rfqd

They also sell oak
http://tinyurl.com/2dma8vh

The stuff I bought (to make a table) didn't resemble the photo -- it
had more, thinner plys, but no skimpy paper-thing veneer over cheap
softwood plywood.  There are some tiny voids at the edges, but not
enough to prevent seating a nail or screw.  I still have the scrap
piece.  Still, I'd pilot-drill, then glue in the nail, as a 3/4"
plywood edge does not compare to solid 5/4" hardwood

Unfortunately, the prices they list are about twice what I remember
paying two years ago!

Look in your "sent" folder for your lost email.

On Tue, Dec 21, 2010 at 10:56 AM, Paul N <crosspein at sbcglobal.net> wrote:
> Bruce,
> Can you define "hardwood plywood". These days, even hardwood veneered
> plywoods are largely crap unless you go find an 11-ply at a specialty
> lumber shop. (And the external veneers are literally paper thin)
>
> In any case, I'd expect the core layers to be pretty much whatever cheap
> lumber they could find. Afterall, that's one of the purposes of the
> material, to save on the cost by using less desirable species for the
> interior. (The other advantage is that the plywood is more stable)
>
> side note: it seems the last post I made is still floating around out
> there somewhere, and I didn't log a copy. If it doesn't show up soon,
> I'll try to recall what I wrote.
>
> **paul
>
>
> On 12/21/10 9:38 AM, Bruce Freeman wrote:
>> Barrel hoops used to be made of greenwood.  Take wythies (watersprouts
>> of willow, typically) and split them lengthwise.  Place flat against
>> leather and nail on.
>>
>> BTW, anyone who thinks you can't nail into the edge of plywood hasn't
>> tried it on hardwood plywood, which is a different animal from the
>> softwood plywood used in construction.
>>
>> On Tue, Dec 21, 2010 at 10:19 AM,<xlch58 at swbell.net>  wrote:
>>> On 12/21/2010 8:11 AM, Bob Ehrenberger wrote:
>>>> Paul,
>>>>
>>>> You may be able to bond a strip of solid wood to the edge of the plywood.
>>>> Back when I used to do some wood work (before blacksmithing) if I made a set
>>>> of book shelves I would cover the cut edges with solid wood to hide the fact
>>>> that it was mainly plywood. Of course on a curved surface you would need to
>>>> heat or steam the strips to get them to bend, that makes it a lot more work.
>>>>
>>>> Robert Ehrenberger
>>>> Shelbyville, Mo.
>>>> eforge at centurytel.net
>>>
>>> Cut them real thin and stack them and glue them around the rim of the
>>> plywood.  No steaming necessary.
>>>
>>> Charles
>>> ______________________________________________________________
>>> TheForge mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/theforge
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:TheForge at mailman.qth.net
>>>
>>> TheForge mail list group photo site is
>>> http://www.photoworks.com
>>> Login: blacksmithblacksmith at hotmail.com
>>> Password: anvil
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>
>>
>>
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
>
> TheForge mail list group photo site is
> http://www.photoworks.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



-- 
Bruce
NJ