[TheForge] -Hay rake tines

[dan tull]

Spark like 1085
----- Original Message ----- 
From: "Ron Childers" <munlaw2 at hcsmail.com>
To: "'Blacksmithing List Sponsored by ABANA'" <theforge at mailman.qth.net>
Sent: Thursday, March 26, 2009 2:37 PM
Subject: Re: [TheForge] -Hay rake tines


> Dave, do you make tools for wood turning? I found some cotter-pin looking
> things on the railroad and they are harder than woodpecker lips. They are
> about 1/2" x 3/8" and when straightened they are about a foot long.
>
> Does anyone know what kind of steel these could be?
>
> I made a couple of gouges for my wood lathe and some chisels and they hold
> an edge pretty well, but I haven't tried making a knife out of them.
>
> Ron
>
>
>
> -----Original Message-----
> From: theforge-bounces at mailman.qth.net
> [mailto:theforge-bounces at mailman.qth.net] On Behalf Of David E. Smucker
> Sent: Thursday, March 26, 2009 1:59 PM
> To: TheForge
> Subject: [TheForge] -Hay rake tines
>
> Ron,  I think we are really coming from the same point of view -- for thin
> sections of W 1 oil works great and you are less likely to lose the item 
> to
> cracking.
>
> On unknow steels I often first quench in oil -- then if the tool doesn't
> come up to the hardness I am looking for I reheat treat going to water or
> brine.
>
> I almost always temper -- mostly in a small oven, that is in my shop. 
> While
>
> I make wood working tools, I not a bladesmith so don't look for quite the
> performance you bladesmiths do.
>
> Dave
>
>
>
>
>
>
>
>
> ************************************************************************************
> This footnote confirms that this email message has been scanned by
> PineApp Mail-SeCure for the presence of malicious code, vandals & computer 
> viruses.
> ************************************************************************************
>
>
>
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
>
> TheForge mail list group photo site is
> http://www.photoaccess.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>