[TheForge] kaowool

[GRAF]

OR
you could just by some insulation board.

Mike Graf

terry l. ridder wrote:
> hello;
>
> i need to protect an area from heat while some work is done.
> i have two rolls of kaowool 8lb density blanket. i am thinking
> of using this as the basis of the protection. it needs a
> stiffener applied to it and then a coat of itc-100 over the
> stiffener.
>
> i need to stiffen the kaowool enough so that a piece 4ft square
> would stand up on its own.
>
> once i have the kaowool stiffened and coated with itc-100, i plan
> on placing it in a stainless steel channel frame. the frame will
> not crush or firmly hold the kaowool. the frame is just to provide
> minimal support. the frame is more to protect the edges of the
> kaowool blanket from damage when moved.
>
> i have been unable to find a stiffener to use on the kaowool.
>
> any suggestions, hints, comments, flames are most welcome.
>
>