[TheForge] Forging a post vice

[Marc Godbout]

Any problems extracting the screw after the box cooled down?

--Marc


On Wed, Apr 22, 2009 at 1:33 PM, Bob Ehrenberger <eforge at centurytel.net>wrote:

> I have an old vice where the thread box was made by swaging it over the
> screw.  I discovered this when it started to slip.  I fixed it using the
> same method, I got the box hot, quickly inserted the screw and hammered it
> into the swage block.
>
> Robert Ehrenberger
> Shelbyville, Mo.
> eforge at centurytel.net
>
>
>