[TheForge] Band saw blades

[Jerry Frost]

It's a spot welder, not an arc welder. No flux 
necessary. Contact Delta with the model # and ask for 
the books and trouble shooting advice.

Frosty
-------------------------------
If it ain't forged
it ain't real.
Wrought iron is.
The FrostWorks

Meadow Lakes, AK.


From: "robert hensarling" <rhrocker at hilconet.com>



> You mentioned that the neat thing is welding etc.  I 
> have a 20" Delta and
> one the face of it is a small grinding wheel, then 
> after you grind a taper
> on both ends, you clamp the blade where you want to 
> weld, then touch a
> button and it welds.  The grinder is then used again 
> to clean up the weld
> (no thump, thump,thump, etc). This is the good 
> thing!!!  The bad thing is
> that I can't get it to work (the arc weld feature). 
> Also there's no info
> about flux, etc.
> I guess the clamping fixture could also be used to 
> hold the ends securely
> while I silver soldered and ground.
> Can any one hazard a guess as to why the arc welder 
> won't work?  I don't
> think it's fused, I think it picks up it's juice from 
> the input box hanging
> on the side.  Could be fused between that box and the 
> arc welder eh?
>
> Ok, Whoa!  I really got off the well beaten path. 
> Apologies, and back to
> you guys.
>
>