[TheForge] Power Hammer Foundation

[Jerry Smith]

Mine is sitting in a sand box with 6 inches of sand
between the hammer base and the floor.

Jerry

--- Grant Marcoux <gblacksmith at alamedanet.net> wrote:

> Peter:  I have a 25# LG and the floor weight on
> these is about 980 lbs, well
> below the strength of a 4" concrete floor.  However,
> I would mount the
> hammer on some of the steel belted rubber floor
> protector and secure the
> hammer to the deck with concrete anchors drilled
> through the floor
> protector.  My hammer has been fine on a 3/8 "
> plywood wafer, but the
> matting would have been better.  Grant
>