[TheForge] Anvil

[Mark A. Pesetsky]

Yep....Thanks 


Mark Pesetsky
Senior Technician/Night Manager
Media Services
Princeton University
(609) 258-1603

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Ron Childers
Sent: Tuesday, March 27, 2007 1:26 PM
To: 'Sponsored by ABANA'
Subject: RE: [TheForge] Anvil

Doesn't matter- But remember, 6" sq is heavier than 6" rnd

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Phil
Sent: Tuesday, March 27, 2007 1:16 PM
To: Sponsored by ABANA
Subject: Re: [TheForge] Anvil


Mark:

I think most folks use round stock, it seems to be more abundant in
those larger sizes.  I would use what ever you can get your hands on, is
not too expensive, and has enough mass.

Phil
--- "Mark A. Pesetsky" <pesetsky at Princeton.EDU> wrote:

>  
> 
> 
> I am a PIA but I want to know what those more experienced with these 
> hammers think about certain aspects of building one before I order the

> parts....
> 
> Round stock or square on the anvil? I am about to place the order for 
> this piece of steel as well as the rest of the steel...hammer 
> head...etc....
> 
> Also, at what point in the stroke of the air cylinder do you want the 
> hammer head to meet the die? If the stroke is 12"
> would the contact be
> at the 8-10" point on the stroke?
> 
> Thanks Again Guys
> Mark
> _______________________________________________
> Manage membership or unsubscribe at: 
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is http://www.photoaccess.com
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
> 
> 
> 



 
________________________________________________________________________
____
________
Finding fabulous fares is fun.  
Let Yahoo! FareChase search your favorite travel sites to find flight
and hotel bargains. http://farechase.yahoo.com/promo-generic-14795097
_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________



_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________