[TheForge] Coal Forges - lets try this again

Tue Jul 3 22:19:16 EDT 2007

	I don't recall the exact price. It has been several years since we
got one for the museum forge. As I remember it is $150.00 - $170.00 but
don't hold me to that guess. In my opinion you will be hard pressed to find
a better pot for the price. We bought the smaller rectangle shaped one.

Bob Willman
Bowling Green, Ohio
The Eagle's Anvil
WB8NQW

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Alix Peshette
Sent: Tuesday, July 03, 2007 10:11 PM
To: 'Sponsored by ABANA'
Subject: RE: [TheForge] Coal Forges - lets try this again

Hi,
I usually just lurk, but I have been following this fire pot thread closely.
I checked out the website and found the info.  Unfortunately, there is no
price list and one needs to call the guy.

http://sofablacksmiths.org/links.html

-Alix

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Jerry Smith
Sent: Monday, July 02, 2007 4:57 PM
To: Sponsored by ABANA
Subject: RE: [TheForge] Coal Forges - lets try this again

Bob,

I can't find anything like that on their webpage, could you give me some
insight on where or sho for this fire pot?

Thanks,

Jerry
--- Bob Willman <blcksmth at wcnet.org> wrote:

> Southern Ohio Forge and Anvil (SOFA) has a heavy duty firepot that I 
> think is hard to beat. It is about 5/8" thick cast with replaceable 
> clinker breaker and ash dump gate. I have had one for 20 years still 
> with all original parts.
> 
> 
> Bob Willman
> Bowling Green, Ohio
> The Eagle's Anvil
> WB8NQW
> 
> -----Original Message-----
> From: theforge-bounces at mailman.qth.net 
> [mailto:theforge-bounces at mailman.qth.net] On Behalf Of Grant Marcoux
> Sent: Monday, July 02, 2007 4:46 PM
> To: Sponsored by ABANA
> Subject: RE: [TheForge] Coal Forges - lets try this
> again
> 
> I have seen some fairly nice firepots made from
> segments of 5/8" or 3/4"
> plate, welded together.  There are drawings on the
> web for these, but I
> can't recall the addresses.  Grant
> 
> -----Original Message-----
> From: theforge-bounces at mailman.qth.net 
> [mailto:theforge-bounces at mailman.qth.net]On Behalf Of Jerry Smith
> Sent: Monday, July 02, 2007 1:31 PM
> To: Sponsored by ABANA
> Subject: Re: [TheForge] Coal Forges - lets try this
> again
> 
> 
> Ben,
> 
> After the Independence Day Celebration, I will check
> with my local steel
> distributor for some sheet steel.
> I need to know if I should buy a fire pot or can I
> build one?
> 
> The blower is easy, I already have a nice 120 vac
> blower on the shop shelf.
> 
> Jerry
> 
> --- Ben Barrett <stircrazyben at gmail.com> wrote:
> 
> > Jerry,
> > This brit who taught me a lot won't stop going on
> and on about
> > side-draft forges, and how they are much better
> than anything else.
> > >From everything I've seen, it REALLY does not
> take
> > much to get a
> > workable forge together.  If what you want is a
> working representation
> > of history, for instance, though, that is a
> different goal.  Sorry our
> > tips didn't help... you didn't speak to the
> aesthetic you're looking
> > for, or whether building something was an option
> -- I'm guessing that
> > either the aesthetic or simply the forge-area
> workspace/table is what
> > you're wanting, let us know.
> >
> > The C536 model is very nice but very overpriced.
> > This has been stated already.
> >
> > Go for it...?  Or, if you're prepared to shop
> around, you should be
> > able to find something just like that for under
> $500, prolly under
> > $300.
> > Craigslist, ebay,
> > local papers, your ABANA regional/local sources,
> post-up walls at
> > pertinent local businesses, etc.
> >
> > If you're willing to build, I think you could get
> away with under $100
> > in parts and under 20 hrs time, to get a workable
> forge, pretty
> > easily, assuming you have access to a welder.  If
> you have some time&
> > money but not willingness to DIY, it seems like
> it'd be fun to find
> > some young earnest metalworker who wants to take
> on the project, and
> > you'd be supporting your local metalworking
> community.  If you lived
> > near me, I'd offer to help.
> >
> > ben
> >
> > PS - Charles, I don't see any big post vises here: 
> > http://www.centaurforge.com/products.asp?dept=139
> > only one in stock, the goose neck, in fact... no
> > photo.
> >
> >
> > On 7/2/07, Jerry Smith <jerry_smith at anvilsandinkstudios.com> wrote:
> > > Folks,
> > >
> > > I am not into using brake drums and tire rims.
> How
> > > about this style of forge:
> > >
> > >
> >
> http://www.centaurforge.com/prodinfo.asp?number=C536
> > >
> > > I have limited space and this forge will be
> moved
> > in
> > > and out of shop so I can work outside.
> > >
> > >
> > > Jerry
> > _______________________________________________
> > Manage membership or unsubscribe at: 
> > http://mailman.qth.net/mailman/listinfo/theforge
> > theforge mail list group photo site is http://www.photoaccess.com
> > Login:  blacksmithblacksmith at hotmail.com
> > password:  anvil
> > ___________
> >
> >
> >
> 
> _______________________________________________
> Manage membership or unsubscribe at: 
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is http://www.photoaccess.com
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
> 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.476 / Virus Database: 269.9.14/884 -
> Release Date: 7/2/2007
> 3:35 PM
> 
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.5.476 / Virus Database: 269.9.14/884 -
> Release Date: 7/2/2007
> 3:35 PM
> 
> _______________________________________________
> Manage membership or unsubscribe at: 
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is http://www.photoaccess.com
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
> 
> 
> 
> 
> 
> _______________________________________________
> Manage membership or unsubscribe at: 
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is http://www.photoaccess.com
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
> 
> 
> 

_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________

_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________