[TheForge] Moloch, pickle problem

[robert hensarling]

Wow!  An ice storm.  Aubrey you better pack up your family and head back
towards the valley!  And when you get to Uvalde, I'll help  you load up the
4 Little Giant Trip Hammers you were wanting!!
Robert
----- Original Message ----- 
From: "Washington, Aubrey O." <awashington at ou.edu>
To: "Sponsored by ABANA" <theforge at mailman.qth.net>
Sent: Monday, December 10, 2007 9:48 AM
Subject: RE: [TheForge] Moloch, pickle problem


Just rub it in Robert!  I used to live in the Lower Rio Grande Valley, and I
miss it on days like these!

My power went off this morning at 4:56, but I was already awake to the
sounds of gunshots all around my house -- I thought I was in Bagdad.  The
gunshots turned out to be hundreds of tree limbs snapping under the weight
of ice.  Fortunately, no trees fell on my house or truck.  I can take the
cold, but no shower and no coffee!  That brutal!

Aubrey

________________________________________
From: theforge-bounces at mailman.qth.net [theforge-bounces at mailman.qth.net] On
Behalf Of robert hensarling [rhrocker at hilconet.com]
Sent: Sunday, December 09, 2007 2:55 PM
To: Sponsored by ABANA
Subject: Re: [TheForge] Moloch, pickle problem

Seems to us like it's freezing here also in South central Texas!  Drizzle
(yuck), and cold, cold temps (60's).   I think I'll load up the family and
head out due South, until I find some rain forrest and banana trees.

----- Original Message -----
From: "Washington, Aubrey O." <awashington at ou.edu>
To: "Sponsored by ABANA" <theforge at mailman.qth.net>
Sent: Sunday, December 09, 2007 2:49 PM
Subject: RE: [TheForge] Moloch, pickle problem


James,

That's a good suggestion.  But, I have already tightened the ram gibs.  They
was quite a bit of slop in the ram when I first got the hammer.  But, now,
after adjusting, they move smoothly throughout their range with almost no
slop at all.  I'm thinking spring tension may be one key to my problem, but
I'm not sure.

Today it is 24*F and icy here in Norman (not too far north of you).  I got
some more K1 for my heater so I may get out to the shop this afternoon.

Aubrey

________________________________________
From: theforge-bounces at mailman.qth.net [theforge-bounces at mailman.qth.net] On
Behalf Of Cindy and James [jallcorn at suddenlink.net]
Sent: Thursday, December 06, 2007 7:55 PM
To: theforge at mailman.qth.net
Subject: [TheForge] Moloch, pickle problem

Moloch,

I have a 25 # Moloch, when it does the bang/tap, I tighten the hammer
guides (the parts that are on each side that the parts slide in).  They
always work loose after a while.   Or, depending on the size work I am
doing, I will raise /lower the hammer on the flywheel.  Good luck.

[snip]
James Allcorn
Bois D'Arc Forge Blacksmith Shop
Paris, TX
_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________
_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________




_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________
_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________