[TheForge] Shop heat - hot water heater

[GHS]

don schad wrote:

> Thanks for everyone's feedback.  I did some ball-park calculations of
> heat loss/etc for the shop and the cost in propane isn't going to be
> as bad as I feared. I think I'll try one of those direct vented
> heaters, and see what the gas company will do with regard to getting a
> seperate tank at a higher pressure.
>
> Thanks all,
>
> don

They may be able to supply two regulators, one high for the forge with 
dedicated piping and one low for the heater.
They may also be able to supply a high pressure line to the shop with a 
step down regulator for the heater and any other low pressure equipment.

Mike Graf

-- 
Please visit us at http://www.gaudeteforge.com/