[TheForge] A real Deal at HF- How about their pneumatic staple gun?

[Ron Childers]

At the risk of being branded a heretic, I haven't had much luck with Harbor
Freight Chinese made stuff. But, since China already owns us, and it is
virtually impossible to "buy US", I may as well acquiesce and help China's
war effort. Has anyone tried the HF Staple Gun? At $20 I wouldn't expect it
to last as long as a Paslode or Senco but if it will make it through a
couple of projects.....The HF wood cutting band saw and cordless drill were
both junk- didn't even do one job. I will concede the $200 metal cutting
band saw seems to be pretty good. Not a Wilton or Ridged, but it works ok. I
guess you have to know which tools are a waste of money and which ones work
ok.

Ron Childers

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Darrell
Sent: Monday, November 06, 2006 6:22 PM
To: Sponsored by ABANA
Subject: Re: [TheForge] A real Deal at HF

I have one of those. So far I have welded an 1 1/8" solid bar in the sheet 
metal axle, replaced the tongue with two inch square tube, replaced the 
cross bar that the rear end of the tongue attaches to with 3" by 3" by 1/4" 
angle and put 90 PSI 2000 LB boat trailer tires on it.
I didn't do all of this at once. I have a 4' X 8' X 4 1/2' plywood box that 
I loaded my reenactment blacksmithing equipment in. After hitting a pot hole

and bending the axle I added the bar stiffener.
After a sudden stop with that load I replaced the tongue. After the next 
quick stop I replaced the cross bar. The tires happened one at a time after 
flats. Now it is a pretty good trailer.

Darrell

----- Original Message ----- 
From: "Jerry Smith" <jerry_smith at anvilsandinkstudios.com>
To: <theforge at mailman.qth.net>
Sent: Monday, November 06, 2006 2:08 PM
Subject: [TheForge] A real Deal at HF


> Folks,
>
> After having my wife in the hospital for most of the
> last 4 weeks, we finally had a day together. So we
> drove to Columbus, had a great lunch at Easton (fancy
> place) and then went to HF. We got was suppose to be a
> 48 x 96 trailer with 12 inch tires, what they gave us
> was the 40 x 48 trailer. I open the box and went back
> to the store and told them what had happened. The
> manager gave us the right trailer for the sales price
> minus 15% for our trouble.
>
> So I will be putting my trailer togther in the next
> few days.
>
> The price for new trailer kit, $144.00, it's the
> http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=90154
> Trailer.
>
> Jerry
> _______________________________________________
> Manage membership or unsubscribe at:
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
>
> 

_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________