[TheForge] bending forks

[xlch58 at swbell.net]

I even made up a set of increasing diameter tubes to put around one pin 
to set the bend radius.  I used a lathe to get the sizes right from 
scrap, but if you have a really patient metal supplier, he might be able 
to cut sections of mechanical tubing for you.  

Charles

Ron Childers wrote:

>Frosty,
>
>For adjustable bending forks use 2 pcs of angle with a pin welded to each.
>Put in the vice instead of the anvil and adjust to the bend you want.
>Simple; made from scrap.
>
>Ron C
>
>  
>