[TheForge] A little help please

[Demon Buddha]

Lynn Emrich wrote:
> I had a hard disk crash a while back and lost all my
> links. I know, I should 
> have backed up.
> If anyone can send me a link to the person who
> collected all the knife maker 
> resources I would greatly appreciate the help.
> Thanks,
> Lynn


Have you tried Enco?

http://www.use-enco.com/

--- GHS <GHS at execpc.com> wrote:


 >> My local supply of 41/2 inch aluminum oxide/resin
 >> disks had dried up and
 >> I am close to the end of the last box.
 >> I refuse to buy them 3 at a time, on a card, from
 >> the "hardware" store.
 >>
 >> Does any one have a good on line or mail order
 >> source? Someplace that
 >> sells them 50 to 100 in a box.
 >>
 >> Mike Graf



Try Pearce Abrasives- Their ad is in "Blade Magazine". You can order crates,
dozens, mixed bags or one. Really nice people, too.


Mike,

That's G.L,Pearce, 1-800-938-0021. He will sell you a trailer load if you
want. Of course, the disks are less expensive by the box.

Ron




**********************************************************************************


Hello my Friend, have you checked out http://www.flatground.com/

A.T.

"Many Knives, Many Makers"
http://www.customknives.com
----- Original Message ----- From: "John Venier" <johnvenier at yahoo.com>
To: "Knife List" <knife-list at kepler-eng.com>
Sent: Monday, February 13, 2006 6:26 PM
Subject: [kl] O1 supply


 > Hi All,
 >
 > As you are sure to have noticed, the price of steel has increased a
 > lot lately.  I've been looking at a few different suppliers for O1.


 From Wayne:

	http://www.vikingsword.com/ethsword/index.html


 From Terry:

hello;

i was thinking of a small rolling gantry crane.

http://www.low-cost-cranes.com/gantry-cranes-HSI.html

most of these are probably overkill from what you have said, but you get
the idea.

Von Rolf:

On Feb 1, 2006, at 20:56, Doug Ayen wrote:

 > Mind revealing who your supplier is?


http://www.bucorp.com/ seems to be the US outlet, I buy my steel in 
Sweden at http://www.uddeholm.se/ and order through the local office in 
Malmö. Very knowledgable and helpful people, I hope they are the same on 
your side of the pond.


 From Lyle:

	Tru Gtit www.trugrit.com

Gene Martin:

	Try TruGrit, www.trugrit.com, or 1800 5323336.

Gene