[TheForge] Re: Grinders

[Ron Childers]

It's nice to have several; wire brush, disk & flap wheel- I sometimes use
all 3 on one project. I don't have to waste time changing wheels. Ron C 

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Mike Spencer
Sent: Friday, August 11, 2006 1:39 AM
To: theforge at mailman.qth.net
Subject: [TheForge] Re: 1/2" electric hand drill


me> ...Black & Decker...mid-70s 4-1/2" grinder....Only complaint is
me> that the output shaft thread size isn't the current conventional
me> one so various attachments don't fit.

RC> What is the thread size on the shaft? Someone gave me some 16mm
RC> threaded 4&1/2" disks.... You can get a nut to fit and use
RC> non-threaded wheels.

The matter is moot now since Peggy gave me a new 4-1/2" ginder for my
birthday a couple of years ago and it has the currently standard
thread.  The old B&D is now the spare to avoid unneccessary wheel
swaps.

Anyhow, I never used threaded disks.  But I wanted to use a cup wheel,
cup wire brush and especially a holder for 3M Bristledisk(tm) and
Scotchbrite disks, all requireing a threaded mount.  New grinder does
it nicely.  (Altho I had to get a part custom-made to mount the 3M
things on a grinder.  As designed, they required a tool w/ collet or
Jacobs chuck.)


- Mike

-- 
Michael Spencer                  Nova Scotia, Canada       .~. 
                                                           /V\ 
mspencer at tallships.ca                                     /( )\
http://home.tallships.ca/mspencer/                        ^^-^^
_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________