[TheForge] To ring or not to ring[was anvil i d]

[JOHN CHOBRDA]

Sodorfors are cast steel and will ring, a cast iron anvil will not.

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Jerry Frost
Sent: Saturday, April 22, 2006 1:11 PM
To: Sponsored by ABANA
Subject: Re: [TheForge] To ring or not to ring[was anvil i d]

Rebound is what counts. It's the return of energy to the hammer and applies 
force to the underside of the piece being worked.

The ring is how the anvil expresses the wasted energy caused by lateral 
movement in the anvil. An anvil that doesn't ring is still wasting energy 
(unavoidable) it's just less annoying about it.

As to which anvils will or won't ring, the wrought body vs. cast body factor

isn't the answer. My cast body, steel faced Sodorfors would ring your ears 
through doubled, plugs and muffs,hearing protection if I hadn't taken pains 
to damp the ring.

I don't know what factors do determine when a good quality anvil will or 
won't ring though. As I don't plan on producing a line of anvils I think 
I'll hold off on the indepth research as well. <grin>

Frosty
-------------------------------
If it ain't forged
it ain't real.
Wrought iron is.
The FrostWorks

Meadow Lakes, AK.

http://www.artmetalradio.com/


From: "JOHN CHOBRDA" <jchob at verizon.net>


> Paddy
> Your anvil should have some "ring" Wilkinson's are wrought iron with
> a welded steel face just like your Peter Wright. The only anvils that have
> no ring are cast iron like Fishers.
>

_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________