[TheForge] food-safe finishes

[Grover Richardson]

Ohh, I am a bad toady.

I just had to look it up.  Fisher Scientific sells it also.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID REPEATED OR PROLONGED CONTACT
    W/THIS SUBSTANCE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
    REGULATIONS .

Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY RELEASE
    ACRID SMOKE & IRRITATING FUMES.

Supplemental Safety and Health
APPEAR/ODOR:BECOMES RANCID ON EXPOS TO AIR. 


=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SKIN:RARELY, SENSITIZATION
    REACTIONS HAVE BEEN REPORTED IN PREVIOUSLY EXPOSED INDIVIDUALS.
    INGEST:INGESTION OF LARGE AMOUNTS MAY PRODUCE LAXATIVE EFFECT.
    ASPIRATION INTO LUNGS MAY RESULT IN LIPO ID PNEUMONIA.
    CHRONIC:SKIN:PROLONGED CONTACT HAS PRODUCED MODERATE IRRITATIONS IN
    ANIMALS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.




>*>-----Original Message-----
>*>From: theforge-bounces at mailman.qth.net 
>*>[mailto:theforge-bounces at mailman.qth.net] On Behalf Of 
>*>Grover Richardson
>*>Sent: Wednesday, November 02, 2005 11:19 AM
>*>To: 'Sponsored by ABANA'
>*>Subject: RE: [TheForge] food-safe finishes
>*>
>*>
>*>Yes, if we use it at work in an industrial application, we 
>*>would get the msds on olive oil.  That's why the U S of A 
>*>doesn't do as much manufacturing as we used to do.
>*>
>*>>*>-----Original Message-----
>*>>*>From: theforge-bounces at mailman.qth.net
>*>>*>[mailto:theforge-bounces at mailman.qth.net] On Behalf Of 
>*>>*>schade at acegroup.cc
>*>>*>Sent: Wednesday, November 02, 2005 11:00 AM
>*>>*>To: Sponsored by ABANA; pesetsky at Princeton.EDU
>*>>*>Subject: Re: [TheForge] food-safe finishes
>*>>*>
>*>>*>
>*>>*>
>*>>*>On Nov 2, 2005, at 8:54 AM, Mark A. Pesetsky wrote:
>*>>*>
>*>>*>>
>*>>*>> Un-true....sorry Grover...ha
>*>>*>>
>*>>*>> Mark Pesetsky
>*>>*>>
>*>>*>
>*>>*>oil going rancid is (in my opinion) an example of 
>*>overthinking the 
>*>>*>subject. If the micron thick coating of olive oil (or any 
>*>>*>oil) was to 
>*>>*>go rancid what is the worse case scenario? How complicated 
>*>>*>can it be to 
>*>>*>put a little oil on a spoon? Should you send to Sicily where 
>*>>*>the olive 
>*>>*>oil was pressed to get the Material Safety Data Sheets 
>*>>*>(MSDS) on olive 
>*>>*>oil?
>*>>*>
>*>>*>What's next?
>*>>*>
>*>>*>Bob
>*>>*>
>*>>*>_______________________________________________
>*>>*>Manage membership or unsubscribe at: 
>*>>*>>*>http://mailman.qth.net/mailman/listinfo/theforge
>*>>*>theforge 
>*>>*>mail list group photo site is http://www.photoaccess.com
>*>>*>Login:  blacksmithblacksmith at hotmail.com
>*>>*>password:  anvil
>*>>*>___________
>*>>*>
>*>>*>
>*>
>*>_______________________________________________
>*>Manage membership or unsubscribe at: 
>*>>*>http://mailman.qth.net/mailman/listinfo/theforge
>*>theforge 
>*>mail list group photo site is http://www.photoaccess.com
>*>Login:  blacksmithblacksmith at hotmail.com
>*>password:  anvil
>*>___________
>*>
>*>