[TheForge] Drill Press

[Steve Smith]

Your words are too few for me to guess what the confusion is. What I'm 
saying is that the chuck end of his arbor is JT33, while the drill press 
end is something else (likely MT2). What made me write this was Mark's 
comment:

"Yep JT 33....So now all I need to find out is the diameter of the hole 
in the ALBRECHT and order a JT33 to fit that?"

The way I read this, it sounds like Mark thought his drill press was 
JT33, and all he needed to know was the taper size in the Albrecht. I 
thought this worth commenting on, since the JT33 refers to the chuck not 
the drillpress.

Steve


Dan Tull wrote:

> HUH?
> dan tull
> georgia
> abba, afc, S.C. psba, obg,sofa
> ----- Original Message ----- From: "Steve Smith" <sos at alum.mit.edu>
> To: "Sponsored by ABANA" <theforge at mailman.qth.net>
> Sent: Tuesday, October 19, 2004 6:01 PM
> Subject: Re: [TheForge] Drill Press
> 
> 
>> I think the JT33 means the taper of the chuck, not the drill press. 
>> Since the arbor is changeable, there wouldn't be any sense in having 
>> its size stamped on the chuck.
>>
>> Steve