[TheForge] emergency generator

[Darrell]

I have a 50 amp outlet at my meter base. That lets me plug things in to run
them when the power is on.
When the power is off, I flip the main at the meter which disconnects me
from the power company and plug the welder into the outlet which lets me
power up the house.
While it would be dangerous to the lineman if you connect to the grid, it
would most likely either stall the generator or burn it out from the load.
Darrell

http://www.machinemaster.com
----- Original Message ----- 
From: "Steve Smith" <sos at alum.mit.edu>
To: "Sponsored by ABANA" <theforge at mailman.qth.net>
Sent: Wednesday, November 17, 2004 2:48 PM
Subject: Re: [TheForge] emergency generator


> When we moved to Maine, hearing stories about how long one could be
> without power due to an ice storm, we bought a unit large enough to run
> our typical household consumption. No, this does not include things like
> the plasma cutter and air hammer!
>
> We went with Winco:
> http://www.wincogen.com/
> for a variety of reasons, mainly opinions gleaned from digging through
> internet news postings. I don't have any hard data to offer to help pick
> a brand. We've had no problems with it during regular testing over the
> first year. Sample of one.
>
> Do remember that a new generator is shipped without oil in it! Before
> you add the oil, however, check to see if it has had oil added (speaking
> from experience here). Mine still had the NO OIL tags, but they had
> added oil at the stock point...sort of a mess.
>
> Be sure to take a look at fuel consumption on these things. They will
> usually list consumption at full load and half load. Half load consumes
> more than half the full load fuel. If you compare a large generator at a
> given load to a small one at the same load but maxed out, the small one
> will consume less fuel. They suck down quite a bit of fuel, and aren't
> cheap to operate. So it helps to size your generator to your needs. On
> the other hand, it is a real pain if you undersize it.
>
> I don't know if anyone else has mentioned this, but it is critically
> important that you have a disconnect switch between your generator and
> the incoming power line. You *do not* want to be putting power back out
> on the line from your generator when there is a power outage. You could
> kill a power line worker pretty easily. You don't need to invest in the
> automatic type (unless that sort of thing appeals to you). A simple
> manual disconnect switch will suffice (but it has to handle all of the
> current, a good sized switch).
>
> The portable units are appealing price-wise. They seem to work well for
> some folks, but they aren't necessarily rated for full time operation.
> We went with the stationary type of unit as we wanted to be able to run
> normally during an extended outage (not on 24 hours a day necessarily).
> If all you're doing is keeping the freezer ok, maybe a portable unit is
> the right way to go. Be sure to read the fine print on output power
> capability. I wouldn't expect long trouble free use if it runs all the
> way maxed out.
>
> Steve
>
>
> Schade wrote:
> > I want to be able to run my submersible pump. I think it's 1-1/2 hp.
> > I also want to be able to keep my freezer frozen and refrigerator
> > cold. I have a 500 gal propane tank but have been looking at
> > gasoline generators. I never thought of propane.
> >
> > I saw a used and returned 5000 watt "Dunlite by Onan" (SGRBA 378A)
> > w/11 hp Honda engine  for $899.00 I haven't been able to find any info
> > on the web for this generator.
> >
> > Going looking now to the House of Generators. Thanks for the ideas.
> >
> > Bob
> > ____
> _______________________________________________
> Manage membership or unsubscribe at:
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
>
>