[TheForge] Sandblasting Media / Pressure Pot on Sale @ HF

Thu Mar 11 17:37:00 2004

I have that exact same model here, when buying it see if you can get the
consumables, ie ceramic nozzles and the plastic lens for the hood, took me a
while to find someone who could order them in. Also my tank has a pin hole
in the top of it, I havent bothered to weld it up yet, maybe I should....

----- Original Message ----- 
From: <[email protected]>
To: <[email protected]>
Sent: Friday, March 12, 2004 1:14 AM
Subject: Re: [TheForge] Sandblasting Media / Pressure Pot on Sale @ HF

> In a message dated 3/11/2004 6:09:19 AM Pacific Standard Time,
> [email protected] writes:
> I just got one of those little pressure pot sandblasters on sale at Harbor
> Freight
> http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=34202
>
> I found the $10 venturi pick-up type to be pretty lacking.  Hopefully this
> one will do a little something for me.
>
> I'm looking for media that's aggressive but doesn't cause that lung
disease
> silica sand does.  Sillicosis or something.  I can only generate 18 CFM @
90
> psi so I have to stick with an 1/8" nozzle.
>
> With silica, would a good dust mask be enough, if I'm not engulfed in
dust,
> or a respirator?
>   Nix to the dust mask. You need a properly fitting respirator. That
means,
> go to an actual safety supply company and get one fit.
>   Also, the pot will only work if you keep your media dry. First thing to
do
> is install a big water trap on the compressor if you use it in winter,
second
> thing is warm the sand until it isn't moist. Otherwise you won't need the
> respirator, 'cause nothing much will be happening.
> Mikey
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment.  Attachments are not allowed.  To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> _______________________________________________
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  [email protected]
> password:  anvil
> ___________
>