[TheForge] HELP

[Shannell Sugrue]

And check that the pilot valves/valve are sending an air signal when
activated by hand also, disconnect the line to the 5 way valve from the
pilot to look for the signal.
----- Original Message ----- 
From: "kim george" <klgeorge at kent.edu>
To: <theforge at mailman.qth.net>
Sent: Thursday, July 15, 2004 11:03 AM
Subject: [TheForge] HELP


> Got the hammer up and running and it cycled but slow.Now it's stopped for
> some reason the four way cycles quickly  once  when the air is hooked then
> locks up and doesn't reverse. The air bleeds off slowly( about 45 sec.)
and
> then an other cycle. Everything is plumbed according to the schematics .
We
> changed all the valves with a second set we had for another hammer . It
> still does it. The valves are Parker Hanifen  to spec. for the Zoller
> variation. I'm almost ready to get a bigger hammer(grrrr).
>
> Kim George
>
>        "Why for you burry me in cold,cold ground?" Taz
>
>
> _______________________________________________
> Manage membership or unsubscribe at:
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
>