[TheForge] Sandia Forge

[Larry and Pat Brown]

Hi
I made one years ago with the New York State Blacksmiths. We had a form 
made and used a ram able refractory in it to make a bottom floor that goes 
over the insulation board.  I don't know how the Kaowool will last as the 
ceiling. Check furnace suppliers for the board. Also "Y" your gas line and 
use two ball valves, one for each burner and two short pieces of pipe 
instead of a long one with the jets as it will make getting it adjusted 
much easier.
Larry Brown


At 09:16 PM 1/22/2004 -0800, you wrote:
>I have started to build the Sandia forge.  The plans are from ABANA.
>I posted some pictures of the sheet metal I bent today.  The easy part
>as far as I can tell.  I am having a hard time finding the insulation board
>around So. OR.
>I thought I might use Kaowool and paint it with ITC-100.
>
>How does that sound?
>
>
>I wold like to thank all who replied to my question on phase converters.
>I have quite a lot to read!
>
>Y'all know what the difference is between electricity and VOODOO......?
>
>NOTHING!!
>
>Kenny  :^o
>
>_______________________________________________
>http://mailman.qth.net/mailman/listinfo/theforge
>theforge mail list group photo site is
>http://www.photoaccess.com
>Login:  blacksmithblacksmith@hotmail.com
>password:  anvil
>___________
>