[TheForge] RE: steel ID

[Bob Ehrenberger]

+++ Original Message +++
>From: "gblacksmith" <gblacksmith@alamedanet.net>
>
>Robert:  Quite often, these pins are made of impact resistant steels like
>S-1 or S-7.  However, you can likely check with Caterpillar tech services.
>Knowing the part nomenclature would be helpful, but they should be able to
>help without it.
>
>Grant

If they are S-series they may be better used for hot cuts and punchs. I'll
see
if my friend can get the specks.

Robert Ehrenberger
Shelbyville, Mo.