[TheForge] Mastermyr II

Tue Mar 11 21:13:01 2003

But its wood! A foreign nasty substance that breaks into little pieces when 
I hammer it
I'll have to mull and brood a bit, I'll let you know
Larry

At 08:41 PM 3/11/2003 -0500, you wrote:
>Larry,
>
>Item 22 is actually listed as a bucket handle.  I'm including the text
>for the bucket mount and the handle, just in case you want to make the
>whole bucket, hint, hint, hint.  Here's the text:
>
>Index:
>
>21-22           (?)bucket mount and handle      pls. 10 and 24-25
>p. 11
>
>page 11:
>
>(?)Bucket mount of iron                                         Pl.
>25:21
>
>Three pieces of wide iron band, one edge of which is turned over.  This
>was probably the rim mount of a (?)wooden bucket, with the remains of a
>riveted handle attachment.  The longest piece is made up of two sheets
>joined together by a vertical row of rivets.  A roughly rectangular
>mount, which clearly ends in a damaged loop just above the turned edge,
>is attached by rivets to the joined bands.
>   A rivet-hole about 4 cm from the upper edge of the other portion of
>the band suggests the position of the second handle attachment; there
>are also traces of rust here.  At the lower edge of the band at least
>one rivet-hole can be distinguished.
>Band, width 9.9 cm, total length about 113 cm (70 + 23 + 20cm);
>thickness of plate about 0.2cm.
>
>Handle of Iron                                                  Pls. 10
>and 24:22
>
>Iron handle, possibly associated with the mount no. 21 (see above). It
>is made from a broad, flat iron rod with an open hook at each end.
>Before conservation one of the hooks retained a fragment of the loop to
>which the handle had been attached.  This loop seemed to be of the same
>dimensions and appearance as the loop which is attached to the iron
>mount no. 21.  The distance between the hooks (outside measurement)is 38
>cm, but the curvature of the handle has been exaggerated by bending.
>Width 2.3 cm, thickness 0.20-0.35 cm, length 38 cm, height 18.6 cm.
>
>
>Bill Clemens
>
>
>
>-----Original Message-----
>From: [email protected]
>[mailto:[email protected]] On Behalf Of Larry Brown
>Sent: Tuesday, March 11, 2003 8:01 PM
>To: [email protected]
>Subject: RE: [TheForge] Mastermyr II
>
>Hi
>To anyone with the Mastermyr book, I can't seem to find a description
>for
>item #22 (cauldron handle) on the web site, is it in the book?
>Thanks
>L Brown
>
>_______________________________________________
>http://mailman.qth.net/mailman/listinfo/theforge
>theforge mail list group photo site is
>http://www.photoaccess.com
>Login:  [email protected]
>password:  anvil
>___________
>
>
>
>
>
>_______________________________________________
>http://mailman.qth.net/mailman/listinfo/theforge
>theforge mail list group photo site is
>http://www.photoaccess.com
>Login:  [email protected]
>password:  anvil
>___________