[TheForge] propane forge

Sun Sep 8 19:10:09 2002

http://www.geocities.com/zoellerforge/sidearm.html

Larry Zoeller


----- Original Message -----
From: "Darrell" <[email protected]>
To: <[email protected]>
Sent: Sunday, September 08, 2002 4:47 PM
Subject: Re: [TheForge] propane forge


> Is there a link that shows more info on this burner?
>
> Darrell
>
> http://www.machinemaster.com
>
> Exciting offer! You won't believe it! FREE INTERNET SUPER STORES! Earn Big
> Income! How? By giving away SUPER STORES for FREE! Try it FREE!
> www.freestoreclub.com/go/MoneyMaster
>
>
> ----- Original Message -----
> From: "Jerry Frost" <[email protected]>
> To: <[email protected]>
> Sent: Sunday, September 08, 2002 9:29 AM
> Subject: Re: [TheForge] propane forge
>
>
> > Morning Marc:
> >
> > No flare on this one, I too am going to cast it into the forge liner so
it
> > won'd burn out. For the time being though I have a 1" coupler on the end
of
> > the tube for a field expedient flare and it works okay. Not as well as a
> > properly flared tube but it functions.
> >
> > Don't use a "T", use a cross instead. I used a "T" because the local
> > plumbing suppliers don't carry 1 1/4" crosses and I have a lathe. <grin>
A
> > 1" cross reduced (bushing) to 3/4" for the tube and bushed to 1/8" pipe
for
> > the jet opposite the tube. The same setup as the single side port but
with
> > twice the intake and best of all, just as easy. <grin>
> >
> > The output of these things rests firmly on the carrying capacity of the
tube
> > so all other things being equal, the larger the tube the bigger the
fire. A
> > 1" tube is twice the capacity of a 3/4" tube. Just bigger, not better.
> >
> > Frosty
> > ------------------------
> > If it ain't forged
> > it ain't real.
> > Wrought iron is.
> > The FrostWorks
> >
> > Meadow Lakes, AK.
> >
> >
> > ----- Original Message -----
> > From: "Marc Godbout" <[email protected]>
> > To: "TheForge" <[email protected]>
> > Sent: Saturday, September 07, 2002 10:52 AM
> > Subject: Re: [TheForge] propane forge
> >
> >
> > > Frosty, do you use a flared burner nozzle? I'm going to try casting
mine
> > > in my next forge. I was also thinking of a T arrangement such as your,
> > > but with a 3/4" tube. I've got no lathe, but I might be able to keep
it
> > > square enough on the drill press. Is 1" that much improvement?
> > >
> > > One thing about the side-arm - It's really easy to play with jet
sizes.
> > > I just unscrewed the plug and pulled the entire assembly out, swap out
> > > jet, screw plug back.
> > >
> > > -Marc
> > >
> >
> > _______________________________________________
> > http://mailman.qth.net/mailman/listinfo/theforge
> > theforge mail list group photo site is
> > http://www.photoaccess.com
> > Login:  [email protected]
> > password:  anvil
> > ___________
> >
> >
>
> _______________________________________________
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  [email protected]
> password:  anvil
> ___________
>
>