[TheForge] erasable marker boards

Tue Nov 26 11:49:00 2002

Dave
I used the lens for my classes that I got from WalMart worked good on the
marks that were a few months old.

Dan Rathburn
Elgin, IL USA
----- Original Message -----
From: "Dave Brown" <[email protected]>
To: <[email protected]>
Sent: Tuesday, November 26, 2002 8:36 AM
Subject: Re: [TheForge] erasable marker boards

> At 09:05 11/26/02 -0500, you wrote:
> >Dave,
> >
> >Try 91% (or 100%) isopropyl alcohol, or methanol (sold as fuel for racing
> >cars, or for water-in-the-gas-tank problems in cold-weather areas.  Just
> >be careful to wear gloves if you use methanol (= methyl alcohol = wood
> >alcohol) as it can be absorbed through the skin and is moderately
poisonous.
> >
> >Bruce
>
> I tried isopropyl rubbing alcohol from the medicine cabinet to no avail,
> the same with denatured alcohol from the hardware store (is this wood
> alcohol?) with negative results.
>
> I'm thinking of trying some acetone this morning.
>
> It can be a real pain being cheap and stubborn.  I may just give in and go
> for Aaron's suggestion of a board from Home Depot.
>
>
> Dave Brown
> Heritage Smithing
> Green Bay, WI
> ABANA, UMBA, GoM, MODA, ARG
>
> _______________________________________________
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  [email protected]
> password:  anvil
> ___________
>
>
>