[TheForge] texturing long stock

Mon Jul 15 09:53:00 2002

I recently did a gate that was 4' wide and 7' tall.
The background was basically 6 big scrolls. Each
scroll required 9' of material. (too long to work with)
I cut the 9' into three pieces, the cuts were made in a
place where the scrolls would be touching another
scroll or the frame so that the weld could be easily
blended & or collared.
dave m

----- Original Message -----
From: "Gladish Family" <[email protected]>
To: <[email protected]>
Sent: Monday, July 15, 2002 12:24 AM
Subject: RE: [TheForge] texturing long stock

> Will do this next time, most likely.
> This was one of those "sure would be nice if I can make this work" deals.
I
> was reaching way too far for the treadle pedal- really awkward.
> Thanks, Dave
> Andy G.
>
> > ...cut the long stock into pieces that are easily manageable, do the
> > texturing,  then weld the pieces back together.
> > dave m
> >
>
> _______________________________________________
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  [email protected]
> password:  anvil
> ___________
>
>