[Test-Equipment] Source for Fluke 25/27 DMM parts? ADDENDUM

[Barry]

Well, I dug into it and that lens is pretty much permanently bonded to the frame.  I tried quite forcebly to push it out and it didn't budge.  I'm just about sure it will break if I try to force it any more.

I scraped the excess plastic (lexan?) and then tried to polish it but Novus Plastic Polish #2 doesn't touch it.  I suppose I'm stuck with leaving it like it is unless someone has some experience replacing this.

Thanks,
Barry - N4BUQ


 On Fri 04/05/12  5:37 PM , rbethman rbethman at comcast.net sent:
> Barry,
> 
> Try a Hobby Shop. Perhaps HobbyTown USA. You can by sheets of Lexan 
> smaller than an 8 X 10 size.  Somewhere around 5 x 7 .
> 
> ****************************
> The thickness is about .0045"
> ****************************
> 
> I've used it to make a new window for a Millen GDO, and other projects.
> Cuts with Exacto Knife, or you can get fancy and buy Scissors made for 
> Lexan.  Anyone whom has ever played with R/C Car racing has a pair or 
> two lying around.
> 
> Bob - N0DGN