[Test-Equipment] Need recommendation for accurate low level DVM

[rbethman]

I found a very good, but not quite a Fluke at :owe's about 2 or 3 years ago.

Its price was a little below a Fluke, and I have found it accuracy 
equivalent to an HP-410B.

It had one additional function, temperature, by use of a thermocouple 
that was included

The brand name is "Ideal".  It fits in with what I do, and doesn't cost 
so much as a Fluke.

I've compared the accuracy with the HP-419B, and find it spot on.

Of course, YMMV.

Bob - N0DGN

On Tue 20/03/12 5:31 PM , John Hensley w5jv at hotmail.com sent:
>> Subject sort of says it all: I've been using some inexpensive DVM's over
>> the yearswhich have done all I needed to do.  Lately, however, I am working
>> some areaswhere the low end ranges of those cheap meters aren't doing the
>> job.  For example:resistance measures in the 0 to 100 ohm range; voltage
>> readings in the 1 to 3 voltrange.Fearing an unending thread, please echo your recommendation for a decent
>> DVMwhich can measure these low values accurately.Thanks in advance for the recommendation.  Feel free to respond privately
>> if youwish.John 		 	   		
>>