[Test-Equipment] re Wayne Kerr connectors

[Pete Lancashire]

here's picture with a rule .. sorry for the quality but best can do at
the moment

https://picasaweb.google.com/111617808980322733757/WAYNE_KERR#5575151248542353970

id about 1/4" ?

-pete



On Fri, Feb 18, 2011 at 11:37 AM, Alan Melia <alan.melia at btinternet.com> wrote:
> Yes someone is correct there.....I dont the the correct designation but they
> are refered to as "Burndept" or sometimes "F&E" (Brit Telecom staff)
> connectors in the UK and were used a lot of VHF mil stuff. You will find
> them on the back of the Racal RA17 so a quick query on the Racal group might
> help. The connectors come in two flavours there are brass ones and aluminium
> ones.....latter mainly used on airbourne stuff I think. I had a whole load
> of UHF directional couplers with them on. They also come in two impedances
> but I am not sure what the difference in the plugs is because they are a bit
> like the mis-named UHF (PL259) connectors and I dont think they are constant
> impedance. They turn up from time to time on Ebay. I will dig around to see
> if I have spares but the postage from the UK will propbably make it
> uneconomic. The fixing hole will take N or UHF I think, you might have
> trouble with BNC which should never be fitted to bridges anyway !! (leakage)
> TNC are OK.
>
> Alan G3NYK
>
> ______________________________________________________________
> Test-Equipment mailing list
> Home: http://mailman.qth.net/mailman/listinfo/test-equipment
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Test-Equipment at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>